| PART |
Description |
Maker |
| FP204 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
| MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products, Inc.
|
| ADM823LYRJ-R7 ADM823MYRJ-R7 ADM823RYRJ-R7 ADM823SY |
Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset Output
Supervisory Circuit with Manual Reset and Dual Active-Low/Active-High Push-Pull Reset Outputs
Supervisory Circuit with Watchdog and Dual Active-Low/Active-High Push-Pull Reset Outputs
|
Analog Devices
|
| ADM8320 ADM8316 ADM8318 ADM8319 ADM8322 |
Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Open-Drain Reset Output
Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Push-Pull Reset Output
Supervisory Circuit with Watchdog, Active-Low and Active-High Push-Pull Reset Outputs
Supervisory Circuit with Manual Reset, Active-Low and Active-High Push-Pull Reset Outputs
Supervisory Circuit with Manual Reset, Active-Low Open-Drain and Active-High Push-Pull Reset Outputs
|
Analog Devices
|
| NVT2006PW NVT2006BQ |
Bidirectional voltage-level translator for open-drain and push-pull applications
|
NXP SEMICONDUCTORS
|
| NVT2001 NVT2002 NVT2002DP NVT2001GM |
Bidirectional voltage level translator for open-drain and push-pull applications
|
NXP Semiconductors
NXP Semiconductors N.V.
|
| NVT2008BQ |
Bidirectional voltage-level translator for open-drain and push-pull applications GTL TO TTL TRANSCEIVER, PQCC20
|
NXP Semiconductors N.V.
|
| TXS0104E-Q1 |
<font color=red>[Old version datasheet]</font> 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications
|
TI store
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| CGY887B CGY887B_1 CGY887B-2015 |
860 MHz/ 27.8 dB gain push-pull amplifier
From old datasheet system
860 MHz, 27.8 dB gain push-pull amplifier
|
Quanzhou Jinmei Electronic ...
NXP Semiconductors
Philips Semiconductors
|
| 006200167032800 00110930040 |
pUSH-pULL CONNECTORS
|
AVX Corporation
Amphenol Corporation
|
